Carpentry Squares - Page 3 - Mega Sale! Save up to 23%


Mega Sale! Up to 23% off on Carpentry Squares at N Online Agency, Page 3. Top brands include Bora, Mitutoyo, Jewellers Tools, Workhorse, Generic, Thailand, Empire Level, DBM IMPORTS, Stanley, Robert Larson, Milescraft, Grizzly, TTC, JEVONS, Rangerss, Starrett, Alvin, & Irwin Tools. Hurry! Limited time offers. Offers valid only while supplies last.



Adjustable Square ALM/Steel 8 in.
Adjustable Square ALM/Steel 8 in.
By Bora
In Stock
$45.99

mpn: 530208,

4.8 out of 5 stars with 106 reviews
Bora Multi-Angle adjustable square will help you take the guesswork out of the layouts of complex angles. Precise pre-set locking positions allow for consistent measurements from project to project. Constructed of durable materials with an extruded aluminum base and etched stainless steel ruler, it features a collapsible design allows for ease of use and multiple storage options.Precise accuracy within +/- 0.05 degrees tested to 50,000 completed folding cycles. Collapsible design allows for


Mitutoyo 180-501B Combination Square Blade, 12'', 4R
Mitutoyo 180-501B Combination Square Blade, 12", 4R
By Mitutoyo
In Stock
$62.99

mpn: 180-501B, ean: 0603908580003,

4.0 out of 5 stars with 66 reviews
Combination square blade, 12 in, 4R.The stainless steel blade attaches to the measuring heads allowing for versatile measurements on various types of work pieces. The measuring head is hardened steel. 12 inch.


24'' or 600mm Steel Engineers Try Square Set Woodwork Carpenter Tool
24" or 600mm Steel Engineers Try Square Set Woodwork Carpenter Tool
By Jewellers Tools
In Stock
$60.00

ean: 3777791029882,

4.1 out of 5 stars with 25 reviews
A machinist square or engineer's square is the metalworkers' equivalent of a try square. It consists of a steel blade inserted and either pinned into a heavier body at an angle of 90°. there is evidence of pinning at the intersection of the blade and body: the heads of three pins are visible as dark circles. A small notch has been added to the inside corner of the square to prevent small particles from accumulating and affecting the square's reading. This notch is typical of machinist squares


WORKHORSE 3049.13475867 Cast Protractor Head Only for Combination Squares Sets, 12''-24''
WORKHORSE 3049.13475867 Cast Protractor Head Only for Combination Squares Sets, 12"-24"
By Workhorse
In Stock
$45.29

mpn: 3049.13475867,

4.0 out of 5 stars with 104 reviews
Original workhorse factory made replacement precision square head for workhorse 6 inch cast combination square sets • surface face is as cast then precision ground for general softer hardness when working with more delicate workpieces •protractor heads are bi-directional double indexed at 180° in both directions with spirit bubble level • includes knurled thumb wheel spring loaded blade rule clamping assembly • workhorse factory Statement certificate of accuracy provided.Replacement or


Generic QY-US4-16Jun6-4 *8**3637** Angle Finder & mbinati Tri Square Set 12'' Com 12'' Combination Square SAE & Metric Metric Protractor Level evel SAE & Metric
Generic QY-US4-16Jun6-4 *8**3637** Angle Finder & mbinati Tri Square Set 12" Com 12" Combination Square SAE & Metric Metric Protractor Level evel SAE & Metric
By Generic
In Stock
$29.15

mpn: QY-US4-DEC22-57, ean: 0712166806500,

4.6 out of 5 stars with 60 reviews
Get the all the accurate measurements you need for your wood or metal project with this combination square! The combination set features both SAE and metric graduations on the stainless steel rule and on the aluminum square head, center head and protractor. The combination square set also includes a scribe and spirit level to assure accurate balance and evenness on your project. A great combination set for pros and hobbyists to get thorough and accurate dimensions of their wood or metal work


Precise Measuring Tools Aluminium Combination Square DIY Workshop Hardware
Precise Measuring Tools Aluminium Combination Square DIY Workshop Hardware
By Thailand
In Stock
$19.82
4.4 out of 5 stars with 92 reviews
.


12'' or 300mm Steel Engineers Try Square Set Woodwork Carpenter Tool
12" or 300mm Steel Engineers Try Square Set Woodwork Carpenter Tool
By Jewellers Tools
In Stock
$22.00

mpn: unknown, ean: 3777784370458,

4.0 out of 5 stars with 69 reviews
A machinist square or engineer's square is the metalworkers' equivalent of a try square. It consists of a steel blade inserted and either pinned into a heavier body at an angle of 90°. there is evidence of pinning at the intersection of the blade and body: the heads of three pins are visible as dark circles. A small notch has been added to the inside corner of the square to prevent small particles from accumulating and affecting the square's reading. This notch is typical of machinist squares


Empire Level 120M Polysteel Tri-Square, Metric Graduations On Both Sides Of The Blade
Empire Level 120M Polysteel Tri-Square, Metric Graduations On Both Sides Of The Blade
By Empire Level
In Stock
$14.19
$14.13

mpn: 120M, ean: 0015812120006,

4.7 out of 5 stars with 114 reviews
Polysteel Try-Square W/Vial Metric GradStainless steel blade prevents rust and corrosion. Polycast handle includes acrylic vial for level, plumb and 90/45 degree work. Reads full 8-inch on inside and outside measurements. Metric graduations on both sides of the blade, reads full 200mm on inside and outside measurements. Made in USA.


Hardened Steel 6'' x 4'' Machinists Work Shop Precision Square Squares Wide Base
Hardened Steel 6'' x 4" Machinists Work Shop Precision Square Squares Wide Base
By DBM IMPORTS
In Stock
$25.88

mpn: None, ean: 0789330743343,

4.0 out of 5 stars with 52 reviews
Hardened Steel 6'' x 4'' Machinists Work Shop Precision Square Squares Wide Base. Blade: 6'' ; Beam: 4''. 90 degree angle ; Hardened Steel. Squares are true right angles both inside & outside. Quantity: 1 ; Shipping weight: 13 oz.


Stanley 46-071 7'' Premium Quick Square Layout Tool, Black - 3 Pack
Stanley 46-071 7" Premium Quick Square Layout Tool, Black - 3 Pack
By Stanley
In Stock
$36.01
$30.88
You Save: 14%

mpn: 46-071, ean: 0707918916460,

4.8 out of 5 stars with 139 reviews
Features: -Rafter layout square with black body and yellow graduations for maximum readability in all light conditions.-Extra thick body for use as a saw guide with a 0 to 90 protractor scale.-Material: Aluminum.-Measuring System: Inch.-Type: Triangle Square.-Quantity: 6 per box.-Price is for 1 Each. Color/Finish: -Finish: Black. Dimensions: -Base Length: 10 1/4 in.-Beam Length: 6 3/4 in.Aluminum construction for light weight and durability. Black body with yellow graduations for readability in


Robert Larson Co Mite-R-Angle Layout Tool
Robert Larson Co Mite-R-Angle Layout Tool
By Robert Larson
In Stock
$29.99

ean: 0611867019700,

4.5 out of 5 stars with 146 reviews
Take the guess work out of angles. Fully rotational through 360 ° the Mite-R-Gage uses two legs that allows you to measure both inside and outside angles, transfer exact angles direct to stock, check corners for squareness or set alignment of arm or table saw. It can layout simple or compound miters. Overall length of each leg is 11-1/2''. USA.Take the guess work out of angles..


Milescraft 8455 FramingSquare500 (Metric)
Milescraft 8455 FramingSquare500 (Metric)
By Milescraft
In Stock
$14.99
$13.49
You Save: 10%

mpn: 84550004, ean: 0737888845507,

4.3 out of 5 stars with 45 reviews
This metric FramingSquare500 is used to lay out a ''square'' or right-angle. It can also be used to measure angles with the built in easy angle readout.Built in retractable edge guide. Includes euro style hinge mounting holes. Has three quick angle finders for 30Degree, 45Degree and 60Degree angles.


Grizzly H5604 Center Square 1-1/2-Inch
Grizzly H5604 Center Square 1-1/2-Inch
By Grizzly
In Stock
$11.95

mpn: H5604, ean: 0690550156045,

4.6 out of 5 stars with 78 reviews
This Center Finder Square should be part of your favorite tool collection! Great for finding centers on round or square stock. Heavy beam and angle cut knife edged blades also work great for measuring hard to get to square and 45 degree angles.5/16'' beam.5/16 inch beam. Great for finding centers on round or square stock. Heavy beam and angle cut knife edged blades also work great for measuring hard to get to square and 45 degree angles.


TTC Workshop Square Set - Model: MSS-5533 Blade Length: 2'', 3'', 4''& 6''
TTC Workshop Square Set - Model: MSS-5533 Blade Length: 2", 3", 4"& 6"
By TTC
In Stock
$52.49

mpn: ASS5533,

4.8 out of 5 stars with 107 reviews
Beams and blades ground and lapped for straightness and parallelism.. Squares have true right angles both inside and outside..


3D Squares (2)
3D Squares (2)
By JEVONS
In Stock
$32.70
$29.43
You Save: 10%

mpn: 144041, ean: 0833324000025,

4.5 out of 5 stars with 108 reviews
This heavy aluminum jig is machined square to within .002'' along the entire 6'' leg, and designed to easily clamp on to a project making it simple to square up corners. Six inch long sides give plenty of clamping room so that when square is reached, it is kept until gluing and fastening is complete. Use for squaring up carcases, bookcases, or as part of a jig on a tablesaw. Sold as a set of two. Make great holders/braces for high auxiliary fences for cutting raised panels. Each leg has


WORKHORSE 3049.13475776 Precision Rigid Rule Blade, 12'' x 4R Graduations
WORKHORSE 3049.13475776 Precision Rigid Rule Blade, 12" x 4R Graduations
By Workhorse
In Stock
$32.66

mpn: 3049.13475776,

4.5 out of 5 stars with 130 reviews
Rigid Hi precision replacement blades for workhorse combination squares □ can be used as replacement blade for workhorse combination squares or separate machinists rigid rule □ blades are fully hardened and tempered with satin hi-contrast chrome plated finish □ 4R graduation - 8ths, 16th, 32nds, & 64ths □ 16R graduation - 32nds, 64th, 50th, 100th □ in/metric graduation - 32nds, 64th, 1mm, 1/2mm □ meets Federal specs Type VI Class a □ factory certificate of accuracy for graduations


UPGRADED Metal Multi Angle Measuring Ruler is made of premium alluminum alloy, including the screw caps and the built-in galvanized iron bolts.Perfect for Any DIY Project
UPGRADED Metal Multi Angle Measuring Ruler is made of premium alluminum alloy, including the screw caps and the built-in galvanized iron bolts.Perfect for Any DIY Project
By Rangerss
In Stock
$11.99

ean: 0624940264188,

4.9 out of 5 stars with 26 reviews
What is an angel measuring ruler? The Angleizer Template Tool contains four slotted rulers which are joint together by four screws, and these screws can be adjusted. It can lock into the shape as you need which means it can become a customized stencil in minutes. It eliminates tedious guesswork and wasted materials from inaccurate cuts,you can save money from less raw material wasting. It is a very handy personal or professional device for your work. What is an angel measuring ruler for? Do you


Starrett T-36 Aluminum T-Square for Drafting and General Layout Work, 36'' Length
Starrett T-36 Aluminum T-Square for Drafting and General Layout Work, 36" Length
By Starrett
In Stock
$25.16
$23.02
You Save: 9%

mpn: T-36, ean: 0049659361360,

4.4 out of 5 stars with 56 reviews
Aluminum T-square with blade length featuring large, easy-to-read numbers for drafting and general layout work.The 2'' wide by 0.081'' thick anodized Aluminum blade lies flat and resists bending. Graduations of 1/8'' are on one edge and graduations of 1/16'' are on the other.


Alvin C42 42 inch Transparent Edge T-Square
Alvin C42 42 inch Transparent Edge T-Square
By Alvin
In Stock
$31.00
$23.99
You Save: 23%

mpn: C42, ean: 0088354061755,

4.5 out of 5 stars with 141 reviews
Selected hardwood blade for strength and straightness. Elevated, see-through acrylic edges for smudge-free line work. Smooth wood head attached with five screws for long-lasting squareness.Selected hardwood blade for strength and straightness. See through acrylic edges for smudge-free line work. Smooth wood head. Long lasting squareness. Size:42 inches.


IRWIN Tools Carpenter Square, Aluminum, 16-Inch by 24-Inch (1794450)
IRWIN Tools Carpenter Square, Aluminum, 16-Inch by 24-Inch (1794450)
By Irwin Tools
In Stock
$14.74
$12.04
You Save: 18%

mpn: 1794450, ean: 0038548995212,

4.1 out of 5 stars with 130 reviews
This IRWIN Aluminum Carpenter Square features permanent deep stampings and a rust-proof aluminum body for durability. It can be used for laying out and marking angles in framing, roofing and stairway work, as well as for checking squareness and flatness.Permanent deep carpenter square stampings for durability. Durable, rust-proof aluminum body. Carpenter hand tools for laying out and marking angles in framing, roofing and stairway work. Also used for checking squareness and flatness.



Viewing Page 3 of 5

View more products in Measuring & Layout Tools.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - nonlineagency.com. All Rights Reserved.