End Mills - Page 4 - Mega Sale! Save up to 21%


Mega Sale! Up to 21% off on End Mills at N Online Agency, Page 4. Top brands include JERRAY, WIDIA, SPEED TIGER, DealMux, KKmoon, MegaLane, Makita, uxcell, Cobra Carbide, HHIP, YG-1, SYTOOLS, Drillco, Yingte, FORTOMORROW, & Amana Tool. Hurry! Limited time offers. Offers valid only while supplies last.



JERRAY@ Cutting Tools Solid Carbide roughing End Mills, HRC45 with Tialn Coated, 4 Flutes, 1/4" Diameter, 1/4" Shank, 3/4" Length of Cut, 2" Overall Length
By JERRAY
In Stock
$19.99
$15.88
You Save: 21%

mpn: RC-D1/4"-3/4"-D1/4"*2"-4F,

4.6 out of 5 stars with 20 reviews
RC-D1/4''-3/4''-D1/4''*2''-4FType: Roughing End Mills / Brand Name: JERRAY. Shank Diameter:1/4'' / Cutting Diameter: 1/4''. Flutes length:3/4'' / Overall Length: 2''. Work Material Hardness: HRC45 / Helix: 35 / Number of Flute: 4F. Coating: TiAIN / Material: Tungsten carbide / Packaging: Plastic box.


WIDIA Hanita 490606002RT 4906 HP Roughing End Mill, 0.3 mm Chamfer, 6 mm Cutting Diameter, Carbide, TiAlN Coating, RH Cut, Straight Shank, 3-Flute
By WIDIA
In Stock
$89.10

mpn: 1657018, ean: 4021169016721,

4.9 out of 5 stars with 90 reviews
Special proprietary carbide substrates and state-of-the-art surface technology, combined with unique geometries, provides end users with the capability to significantly reduce machining time with heavier and deeper cuts, fewer passes, and faster surface speed. WIDIA geometries are uniquely formed and fine-tuned to optimize chip form, size, and evacuation generated by a given work piece material.Center cutting. For all ferrous work piece materials. Low power consumption at high speeds with long


WIDIA Hanita TF4V0505000S VariMill I 4V05 HP Finishing/Roughing End Mill, 0.625" LOC, 0.1875" Cutting Diameter, Carbide, TiAlN Coating, RH Cut, 4-Flute
By WIDIA
In Stock
$41.17

mpn: 2870215, ean: 4021169455605,

4.5 out of 5 stars with 48 reviews
VariMill I offers plunging, slotting, and profiling at the highest possible feed rates for a wide range of materials. They are designed to provide maximum Metal Removal Rates (MRR) and to achieve superior surface conditions. A wide range of diameters and corner configurations, such as chamfer, radii, and sharp edges, are available from stock.Center cutting. High-performance universal tools for almost all work piece materials. Single tool for both roughing and finishing operations. Unequal flute


WIDIA Hanita 4V0503001ST VariMill I 4V05 HP Finishing End Mill, 0.5" LOC, 0.125" Cutting Diameter, Carbide, AlTiN Coating, RH Cut, 4-Flute
By WIDIA
In Stock
$22.56

mpn: 5576346, ean: 4050841030199,

4.6 out of 5 stars with 107 reviews
VariMill I offers plunging, slotting, and profiling at the highest possible feed rates for a wide range of materials. They are designed to provide maximum Metal Removal Rates (MRR) and to achieve superior surface conditions. A wide range of diameters and corner configurations, such as chamfer, radii, and sharp edges, are available from stock.Center cutting. High-performance universal tools for almost all work piece materials. Single tool for both roughing and finishing operations. Unequal flute


SPEED TIGER End Mill Holders - Tool Storage & Display Brick Set - Colorful and Convenient (Fractional)
By SPEED TIGER
In Stock
$12.99

ean: 4712805505005,

4.5 out of 5 stars with 111 reviews
SPEED TIGER PRECISION TECHNOLOGY CO., LTD. stands for HIGH-QualityEstablished in 1998, Speed Tiger specializes in the production of precision carbide end mills, inserts, and other tungsten carbide steel cutting tools. Speed Tiger cutting tool tolerances are crafted to nanometer-level precision. Meeting the world's highest precision of ±2μm, Speed Tiger gives you the confidence to succeed in challenging projects thanks to first quality cutting tools.Organize in a SnapAn organized workspace is


DealMux 1/4 x 1/2-inch Woodwork Double Flutes Straight Router Bit Cutter 10pcs
By DealMux
In Stock
$20.18

mpn: DLM-B012TBLA06, ean: 6568598202250,

4.6 out of 5 stars with 146 reviews
Double flutes straight bit for smoothly and long lasting cutting.Can be used to cut grooves, rabbets, slots, dadoes, joint making and general stock removal.Also great for mortising and carving.Please pay attention to the size before ordering to avoid buying wrong item.Product Name: Straight Router Bit; Shank Diameter: 6.35mm / 1/4'; Standard: 1/4' x 1/2'. Type: Straight Shank Double Flutes; Weight: 403g; Material: Metal,Carbide. Overall Length: 63mm / 2.5'; Package Content: 10 x Straight Router


KKmoon 7pcs/set Counterbore Set M3-M12 High-speed Steel 4 Flutes Straight Shank Counterbore End Mills
By KKmoon
In Stock
$30.99

mpn: ONU8576022861315PN, ean: 0749029804588,

4.0 out of 5 stars with 52 reviews
A set of counterbore end mill that is very good quality and works well.Specifications: Material: High-speed steel Drill Quantity: 7pcs Drill Size: M3, M4, M5, M6, M8, M10, M12 Package Weight: Approx. 303g / 10.69oz Package Size: Approx. 10 * 7 * 4cm / 3.94 * 2.75 * 1.57inPackage List: 7 * Counterbore End MillAn essential hardware tool for industrial.. High speed steel, high quality and durable.. The counterbore set works great in counter bored hole.. It includes 7 sizes in one counterbore


MegaLane 50W CO2 Laser Cutter Engraver Cutting Engraving Machine 300500MM Electric Up&Down Worktable,Red Dot Positioning DSP Control,Rotary Device Included
By MegaLane
In Stock
$2,997.00

ean: 0740690593832,

4.3 out of 5 stars with 75 reviews
Introduction: The machine is equipped with a precision 50W water cooled CO2 laser that will engrave anything on almost any surface.Can be used for cutting many different materials. With the Cylinder Rotary Attachment,engrave any cylindrical object Technical Parameters: Laser power:50W Laser type:Hermetic CO2 glass tube Power supply:AC220±10% 50HZ/ AC110±10% 50HZ Working area:300mm X 500mm Max moving speed:500mm/s Locating precision:Work on almost all non-metal


D-34023 Drill Bit Sds-Max 24mmx21.26In
By Makita
In Stock
$21.49
$21.26
You Save: 1%

mpn: D-34023, ean: 0088381364683,

4.8 out of 5 stars with 148 reviews
Key to Makita vision is the Constant strive for innovation in our technology and our products. From our safety solutions like AVT and dust extraction, through to our Lithium-Ion battery and chargers technology, Makita is at the forefront for new ideas. This is all down to our dedicated research and development centre in Japan, where engineers work hard to constantly improve our products in all aspects, from power consumption through to ergonomic design and function.Fast, accurate drilling.


uxcell 1/4-inch Round Shank 1-inch Cutting Dia Woodwork Dovetail Router Bit
By uxcell
In Stock
$11.94

mpn: a16082200ux0269,

4.8 out of 5 stars with 46 reviews
Available for wood cutting applications, plywoods, hardwoods and softwoods etc.This bit allow you to cut matching dovetail joints to the precise and accuracy found in the drawers and furnitures.Bevel Angle: 14 Degree 30 Arcmin; Cutting Depth: 26mm/1''; Cutting Diameter: 25.4mm/1''. Material: Metal; Overall Length: 58mm/2.3''. Package Content: 1 x Dovetail Router Bit; Product Name: Dovetail Router Bit. Shank Diameter: 1/4''; Standard: 1/4'' x 1''. Weight: 48g; Color: Silver Tone.


Cobra Carbide 20161 Micro Grain Solid Carbide Long Length General End Mill, Uncoated (Bright) Finish, 2 Flute, 30 Degrees Helix, Square End, 3/4" Cutting Length, 1/8" Cutting Diameter, 2-1/4" Length (Pack of 1)
By Cobra Carbide
In Stock
$14.10

mpn: 20161, ean: 5899405944492,

4.8 out of 5 stars with 132 reviews
Cobra Carbide general end mill has center cutting geometry. Design for increased chip removal rate. Designed for slotting, profiling and plunging operations. Used for semi-finishing operation. Manufactured from premium sub micron grain carbide. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings


HHIP 3900-5008 MT3-75 Degree Heavy Duty Bull Nose Live Centers, 880 lb. Load Rate, 7.65" OAL
By HHIP
In Stock
$260.78

mpn: 3900-5008, ean: 0769053027203,

4.6 out of 5 stars with 48 reviews
HHIP MT3 75 degree heavy duty bull nose live centers is used for pipe and other hollow-shaped work machining. Drawbar end thread is 3/8''-16. Overall length is 7.65''. Load rate is 880 lbs. a is 1.25''. A is 5.00''. B is 2.40''.Used for pipe and other hollow-shaped work machining. Drawbar end thread is 3/8''-16. Overall length is 7.65''. Load rate is 880 lbs.


YG-1 High Speed Steel NC Spotting Drill Bit, Uncoated (Bright), Straight Shank, Slow Spiral, 90 Degree, 5/8" Diameter x 4-67/128" Length (Pack of 1)
By YG-1
In Stock
$20.99
$17.50
You Save: 17%

mpn: 0401L,

4.1 out of 5 stars with 120 reviews
NC spotting drill. 90 Degree point angle. Made of 8 percent cobalt and high speed steel. For more precise centering work on NC/CNC machine. A larger diameter in respect to the subsequent drilling tool permit to obtain the centering and chamfering simultaneously.NC spotting drill. 90 Degree point angle. Made of 8 percent cobalt and high speed steel. For more precise centering work on NC/CNC machine. A larger diameter in respect to the subsequent drilling tool permit to obtain the centering and


5pcs/lot Dia 3mm 4 Flutes Tungsten Square End Mills Spiral Bits Carbide CNC Endmill Router Bits Hrc45
By SYTOOLS
In Stock
$16.66

mpn: EC-D3*8*D3*50*4F,

4.5 out of 5 stars with 86 reviews
EC-D3*8*D3*50*4FType: Flat End Mills/ Brand Name: Shang You Tools. Shank Diameter:3mm / Cutting Diameter: 3mm. Flutes length:8mm / Overall Length: 50mm / Work Material Hardness: HRC45. Helix: 35 / Number of Flute: 4F / Coating: TiAIN. Material: Tungsten carbide / Packaging: Plastic box / One Package includes 5pcs.


uxcell 1/2-inch Round Shank 1-1/4-inch Cutting Dia Woodwork Dovetail Router Bit
By uxcell
In Stock
$13.23

mpn: a16082200ux0272,

4.2 out of 5 stars with 50 reviews
Available for wood cutting applications, plywoods, hardwoods and softwoods etc.This bit allow you to cut matching dovetail joints to the precise and accuracy found in the drawers and furnitures.Bevel Angle: 14 Degree 30 Arcmin; Cutting Depth: 30mm/1.2''; Cutting Diameter: 31.75mm/1-1/4''. Material: Metal; Overall Length: 68mm/2.7''. Package Content: 1 x Dovetail Router Bit; Product Name: Dovetail Router Bit. Shank Diameter: 1/2''; Standard: 1/2'' x 1-1/4''. Weight: 104g; Color: Silver Tone.


YG-1 EMB12008 Carbide V7 Mill Inox End Mill, 4 Flute, Regular Length, 1-1/2" Length, 1/8"
By YG-1
In Stock
$14.90

mpn: EMB12008,

4.7 out of 5 stars with 60 reviews
A global leader in cutting tools, YG-1 has been providing high performance mills, drills, taps and rotary tools for over 20 years. Leveraging a competitive spirit and vertical integration allows us to provide the highest quality at the best price. This is why we say If it's not YG-1, it's not perfect!Special flute geometry eliminates vibrations. Designed for mild steels, stainless steel, cast iron, tool steels, titanium alloys, pre-hardened steels and low hardness material. Excellent work piece


Drillco 7000C Series Magnum Solid Carbide Bur, Double Cut, Cylindrical Radius End, 1/4 Shank Diameter, 5/16 Head Diameter, 1" Cutting Length (Pack of 1)
By Drillco
In Stock
$19.73
$19.72

mpn: 7C120BDC, ean: 0045997294902,

4.9 out of 5 stars with 143 reviews
Drillco carbide burs are one of the most widely used and versatile cutting tools, used in virtually every industry. Manufactured from tungsten carbide, they are primarily used to remove burrs (the small flakes of metal) that often remain on the workpiece after the machining process. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid tool holding systems. Uncoated tools feature just the base substrate without


Yingte Round Over Router Bit,4pcs 1/4 Inch Shank,1/2 3/8 1/4 1/8 Radius Cutter Set
By Yingte
In Stock
$15.59

mpn: YT052422, ean: 6933398977200,

4.0 out of 5 stars with 23 reviews
Description: 4pcs 1/4 Inch Shank Round Over Edging Router Bit 1/2 3/8 1/4 1/8 Radius Cutter Set   Specification: Body Material: Solid Hardened Steel Blade Material: Industrial grade micro grain carbide Shank: 1/4'' NumberRouter BitShankRouter RadiusBit Dia.Overall Length 1Round over1/4''1/8''3/4''2'' 2Round over1/4''1/4''1''2-1/4'' 3Round over1/4''3/8''1-1/4''2-3/8'' 4Round over1/4''1/2''1-1/2''2-1/2'' Features: - Great for combined plunge-cutting and pattern/template routing. - For increased


FORTOMORROW 4pc 1/4" Shank Top Bearing Flush Trim Pattern Router Bit Set
By FORTOMORROW
In Stock
$59.99

mpn: Router Bit, ean: 0756320509722,

4.4 out of 5 stars with 14 reviews
High-grade welding ,stable quality,high efficiency Using for handmaking a drawer or other woodworking. Totally enclosed and lubricated Carbide Tipped - Micro grain grade provides increased strength and utmost resistance 1/4'' Shank 1-1/2'' Blade 3/4'' Cutting Diameter Top Bearing Dado Planer Pattern Bit 1/4'' Shank 1'' Blade 1/2'' Cutting Diameter Top Bearing Dado Planer Pattern Bit 1/4'' Shank 1/2'' Blade 5/8'' Cutting Diameter Top Bearing Pattern Trim Bit 1/4'' Shank 1/4'' Blade 3/4''


Amana Tool 46473 Metric CNC 2D and 3D Carving 6.2 Deg Tapered Angle Ball Nose x 0.5 D x 0.25 R x 26.5 CH x 6 SHK x 75mm Long x 3 Flute SC ZrN Coated Router Bit
By Amana Tool
In Stock
$54.60

mpn: 46473, ean: 0738685464731,

4.1 out of 5 stars with 123 reviews
Industrial quality aluminum cutting router bits are made by Amana Tool, the leading manufacturers of high quality wood cutting tools. Amana Tool 46473 Metric CNC 2D and 3D Carving 6.2 Deg Tapered Angle Ball Nose x 0.5 D x 0.25 R x 26.5 CH x 6 SHK x 75mm Long x 3 Flute SC ZrN Coated Router Bit incorporates high shear, multi-flute and a Zirconium Nitride (ZrN) Coating designed for the ultimate combination of strength, finish and tool longevity in aerospace materials. Modern-day materials present



Viewing Page 4 of 7

View more products in Power Tool Parts & Accessories.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - nonlineagency.com. All Rights Reserved.