How to use: Twitch handle cheer until hit do not go, generally more than 10.Place a suitable suction cup on the gas cylinder, align the suction cup with the mouth of the toilet or the pipe mouth, dig a hole in the middle of the black bag (or cardboard), and then set the gun head and pull the trigger. If it is still blocked, repeat the above action;
1. Before used should be based on the size of the blocked pipe diameter, switch to select the appropriate gag to install the product to provide four different sizes of gag, the toilet choose the largest gag or the second largest plug mouth.
2. After the gag is installed, you can start to inflate the air reservoir by holding the handle firmly in the left hand and pumping the air pump lever with your right hand to complete several full stroke twitches at least 15-25 times until the pressure does not move.
3. Gagged tightly hold the small nozzle, if not closed, add water to make the water diffuse through the nozzle. At this point can trigger the trigger, hit the air flow, plugs in the pipeline should be followed by strong air washed away. If a failure, you can repeat this operation.
Matters needing attention:
sucker mouth and pipe mouth or pipe mouth to seal tightly, otherwise it will leak, you can add a little water so that the sucker completely immersed in the water
1x drain blaster
4x different sized suckers.
5cm sucker for use on small sinks, narrow pipes, and 1.5" drain openings
6cm sucker for use on all sinks and drains with openings larger than 1.5"
11.5cm sucker for tub and shower drains
4.3cm-11.5cm sucker for toilets and large floor drains