TOGGLER SNAPTOGGLE BAL Long Toggle Anchor, Zinc-Plated Steel Channel, Made in US, 2'' to 9-1/2'' Grip Range, For 3/16''-24 UNC Fastener Size (Pack of 50)
On Sale Now! Free Shipping Included! Save 5% on the TOGGLER SNAPTOGGLE BAL Long Toggle Anchor, Zinc-Plated Steel Channel, Made in US, 2'' to 9-1/2'' Grip Range, For 3/16''-24 UNC Fastener Size (Pack of 50) by TOGGLER at N Online Agency. MPN: 21049. Hurry! Limited time offer. Offer valid only while supplies last. The TOGGLER SNAPTOGGLE BAL Long toggle anchor provides a secure hold from within various hollow materials 2'' to 9-1/2'' thick including gypsum board, drywall, and concrete block, and is made in USA. The anchor requires a 3/16''-24 UNC-threaded metal bolt with a minimum length equal to the thickness of the item being fastened and the thickness of the mounting material plus 1/2''. The anchor channel will not rotate when installing the bolt, whether installing by hand or with a screw gun, and
Product Description & Reviews
The TOGGLER SNAPTOGGLE BAL Long toggle anchor provides a secure hold from within various hollow materials 2" to 9-1/2" thick including gypsum board, drywall, and concrete block, and is made in USA. The anchor requires a 3/16"-24 UNC-threaded metal bolt with a minimum length equal to the thickness of the item being fastened and the thickness of the mounting material plus 1/2". The anchor channel will not rotate when installing the bolt, whether installing by hand or with a screw gun, and will stay in place if the bolt is removed to facilitate fixture and screw changes. The SNAPTOGGLE anchor meets Federal Specification FF-B-588-D for Type V anchors.The anchor consists of a corrosion-resistant zinc-plated steel anchor channel that inserts through a 1/2" drilled hole in walls, ceilings, or floors and installs against the back side of the mounting material; plastic straps attached to the channel that position it into place; and a plastic cap that slides down the straps and presses into the drilled hole firmly to lock the anchor channel in place behind the mounting material. Once the cap is set in place, the straps snap off by hand. The item being fastened affixes to the mounting material by inserting a bolt through the item, into the drilled hole, and through the anchoring channel behind the material and tightening.SpecificationsUltimate Tensile and Shear Strength ValuesMediaDrill DiameterBolt DescriptionUltimate Tensile Strength ValuesUltimate Shear Strength Values1/2" Drywall1/2"3/16"-24 UNC zinc-plated steel238 lb.247 lb.5/8" Drywall1/2"3/16"-24 UNC zinc-plated steel356 lb.298 lb.1/2" Drywall with 25 Gauge Stud*1/2"3/16"-24 UNC zinc-plated steel412 lb.Not Available5/8" Drywall with 25 Gauge Stud*1/2"3/16"-24 UNC zinc-plated steel462 lb.Not AvailableConcrete Block1/2"3/16"-24 UNC zinc-plated steel802 lb.Not Available*Failure measured as breakage of drywall portion.Warning: Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations). For more information, see the manufacturer's technical bulletin.Anchors provide reinforcement to a fastener that would otherwise have insufficient hold in substrates such as concrete, brick, stone, drywall, or other materials for a particular application. The fastener may be included with or integrated into the anchor itself, or it may be sold separately. Anchors provide support through various methods, including expansion from within or behind the substrate or even adhesive compounds.TOGGLER Anchor System manufactures wall anchors and toggle bolts. The company, founded in 1968, is headquartered in Norwalk, CT.
Features & Highlights
- Toggle anchor installs behind 2"- to 9-1/2"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting material
- Anchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes
- Made in USA, and works with 3/16"-24 UNC-threaded metal bolts (sold separately)
- Ultimate tensile strength is 238 lb. in 1/2" drywall and 802 lb. in concrete block with a 3/16"-24 UNC bolt
- Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations)
Mechanical Plastics Corp.
Mechanical Plastics Corp.
6.9 x 5.6 x 16.6 inches
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by TOGGLER, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
By Bridge Fasteners
mpn: SHW4-214, ean: 0852661432092,
Stainless Steel Tapcon. Works in all masonry base materials. 410 Stainless Steel. ICC Evaluation Service, Inc-# ESR-2251.
mpn: 1713SS0, ean: 0082275425931,
MKT Fastening Sup-R-Sleeve acorn nut sleeve anchor is made of 304 stainless steel. Length of sleeve makes anchor more forgiving than a wedge anchor and induces less stress on the substrate. Can be used in solid or hollow masonry. Works in a bottomless hole. Required hole diameter equals anchor diameter. Supplied assembled with 4 possible head styles. Concerns: do not over-torque. Approvals/listings: G.S.A. Spec FF-S-325C, Group II, Type 3, Class 3. 3/8-inches Hole diameter. 1-3/4-inches Maximum
mpn: 13102, ean: 0036296131029,
The TOGGLER ALLIGATOR AF8 flanged anchor provides a secure hold in solid and hollow concrete, brick, stone, and drywall, and is made in USA. Once inserted into a 5/16'' drilled hole in a wall, ceiling, or floor, the anchor accepts a #8 to #14 size screw with a thread length at least equal to the thickness of the item being fastened plus 1-13/16''. The anchor head is flanged for additional stability compared to a flush-mount head when installing into hollow material and has fins that grip the
By RAW PRODUCTS CORP
mpn: 618930261899, ean: 0618930261899,
Wedge Anchor 304 Stainless Steel - 3/8''-16 x 3'' Qty-10Wedge anchors, concrete anchors, or masonry anchors are designed to be installed into solid concrete.. Wedge anchors can be used to fasten objects to concrete.. These anchors can be used for some of the following concrete applications: shelving, railing, duct work, signs, electric pipe, light fixtures, escalators, etc.. Wedge anchors cannot be used on brick or block..